Element, also known as carbamide, is a white crystal, one of the simplest organic compounds, and also the nitrogen fertilizer with the highest nitrogen content at present.
As a neutral fertilizer, urea is suitable for various soils and plants. It is easy to preserve, easy to use, and has little damage to the soil. It is a chemical nitrogen fertilizer with a large amount of use at present. In industry, ammonia and carbon dioxide are used to synthesize urea under certain conditions.
Urea has high nitrogen content, obvious effect after application and no side effect. It can be used as base fertilizer, topdressing, and topdressing outside the root, which is loved by the majority of farmers.
However, if the application method is not correct and the application period is not appropriate, the utilization rate will decrease significantly, and in serious cases, the utilization rate is only 10%~20%. The growers have spent money and wasted time, but they have not received the desired effect, and may even cause "fertilizer harm" and harm crops. Therefore, it is necessary to apply urea correctly and scientifically.
Ten Taboos of Using Urea
1. Avoid mixing with ammonium bicarbonate
After urea is applied to soil, it can be absorbed by crops only after it is converted into ammonia, and its conversion speed is much slower under alkaline conditions than under acidic conditions. After ammonium bicarbonate was applied to the soil, it showed alkaline reaction with pH value of 8.2~8.4. Mixed application of ammonium bicarbonate and urea in farmland will greatly slow down the conversion of urea into ammonia, which is easy to cause the loss of urea and volatilization loss. Therefore, urea and ammonium bicarbonate should not be mixed or applied at the same time.
2. Avoid surface spraying
Urea is applied on the surface and can only be used after 4-5 days of transformation under normal temperature. Most of the nitrogen is easy to volatilize in the process of ammonification. Generally, the actual utilization rate is only about 30%. If it is applied in alkaline soil and soil with high organic content, the loss of nitrogen will be faster and more.
Moreover, urea is easily consumed by weeds due to shallow application. The deep application of urea and the melting of fertilizer in the soil make the fertilizer in the wet soil layer, which is conducive to the exertion of fertilizer efficiency. As topdressing, it should be applied at the side of the seedling in the hole or in the ditch, and the depth should be about 10~15cm. In this way, urea is concentrated in the root dense layer, which is convenient for crops to absorb and use. The experiment shows that deep application can increase the utilization rate of urea by 10%~30% compared with shallow application.
3. Avoid being used as seed fertilizer
In the production process of urea, a small amount of biuret is often produced. When the biuret content exceeds 2%, it will be toxic to the seeds and seedlings. Such urea will denature the protein in the seeds and seedlings, affect the seed germination and seedling growth, so it is not suitable for seed fertilizer. If it must be used as seed fertilizer, avoid the contact between seed and fertilizer, and control the dosage.
4 Avoid watering immediately after application
Urea is an amide nitrogen fertilizer, which can be absorbed and used by crop roots only after it is converted into ammonia nitrogen. The conversion process takes a long time or a short time due to different soil quality, water content, temperature and other conditions. It can be completed in 2 to 10 days generally. If irrigation and drainage are carried out immediately after application or the application of urea in dry land before heavy rain, urea will be dissolved in water and lost. Generally, water can only be irrigated 2 to 3 days after application in summer and autumn, and 7 to 8 days after application in winter and spring.
5. Do not mix with alkaline fertilizer or apply it at the same time
After urea is applied, it must be converted into ammonia nitrogen to produce fertilizer effect. Under alkaline conditions, most of the nitrogen in ammonia nitrogen will become ammonia and volatilize. Therefore, urea cannot be applied together with lime, plant ash, calcium magnesium phosphate and other alkaline fertilizers or at the same time. Generally speaking, in summer and autumn, urea and alkaline fertilizer should be applied three to four days in a staggered manner, and in winter and spring, they should be applied seven to eight days in a staggered manner.
6. Avoid applying to celery
During the whole growth period of celery, a large amount of nitrogen fertilizer should be applied, but urea should not be applied. Because of the urea topdressing, the celery fiber increases and thickens, the plant ages, grows slowly, and tastes bitter, with poor quality. The celery is suitable for ammonium bicarbonate, ammonia water and organic fertilizer, which can improve the quality.
7. Avoid excessive dosage
The nitrogen content of urea is high, and the application rate should not be too large to avoid unnecessary waste and "fertilizer harm". Generally, 5~15kg is applied per mu, and 15~20kg is applied per mu in paddy field. Excessive application will not be absorbed by the soil before it is converted to ammonium bicarbonate, and will be easily leached by rain, and will easily damage crops. At the same time, if too much urea is applied, most of it will be lost and enter the groundwater, which will lead to nitrogen pollution of the water body, resulting in the deposition of nitrite, and seriously affecting the safety of people and livestock.
8 Avoid high concentration foliar spraying
Among all nitrogen fertilizers, urea is the most ideal foliar fertilizer. The amount and rate of protein synthesis of crops were higher than those of other nitrogen fertilizers when urea was sprayed. However, the concentration of urea solution should not be too high when spraying on the leaves, otherwise the leaves will be burned and the plants will be poisoned. Generally, the concentration of corn, wheat, rice and cotton should be 2%; 0.5-1% for vegetables and fruits is appropriate; 0.5-1.5% for fruit trees.
9. Avoid using too late
The application of urea too late is not conducive to the exertion of fertilizer efficiency, and it is easy to cause the crops to become green and mature late. Therefore, it should be applied 4~7 days earlier than other nitrogen fertilizers.
10 Avoid single application
The effective component of urea is nitrogen, and the nutrient is single, while crop growth and development need multiple nutrients. Therefore, urea should be applied together with organic fertilizer, phosphorus and potassium fertilizer to meet the needs of crops for various nutrients. Moreover, reasonable mixing of urea with organic fertilizer and chemical fertilizer can effectively improve its utilization rate. If urea and superphosphate are applied together, the unstable ammonium bicarbonate can be transformed into stable ammonium phosphate, so that the natural volatilization of nitrogen will be greatly reduced. The mixed application of urea and organic fertilizer can produce organic acid in the fermentation process, accelerate the transformation and decomposition of urea, quickly be absorbed by crops, and improve the utilization rate of urea.
